
What an Essix retainer is
An Essix retainer is a clear, removable retainer made by thermoforming a sheet of plastic over a model of the patient's teeth. It is used after orthodontic or clear aligner treatment to keep the teeth in their new position, and it is popular because it is almost invisible and quick to produce.
The retainer itself is not designed in CAD: it is pressure- or vacuum-formed in the lab. What is designed digitally is the model it is formed on, and that model decides how well the retainer fits.
From intraoral scan to printed model
When the clinic sends an intraoral scan instead of an impression, the lab needs a physical model to form the retainer on. A raw scan cannot be printed as it is: it has holes, uneven edges and no base. It first has to be turned into a printable model.
- Holes and scanning artefacts are repaired so the tooth surfaces are complete
- The edges are trimmed and a flat base is added at a sensible height
- The model is kept solid, or given thick walls, so it does not deform under the heat and pressure of thermoforming
- Deep undercuts and gaps between teeth can be blocked out, so the retainer is easy to remove and the plastic does not lock onto the model
- A label with the patient or case reference can be embossed on the base
Why the model height and base matter
A tall model makes the plastic stretch more and become thinner over the teeth. A model that is too short leaves no room to trim the retainer along the gum line. The base is usually set so the teeth and a few millimetres of gum are above the forming plate, with the bottom of the model flat so it sits firmly in the machine.
Retainers after clear aligner treatment
At the end of a clear aligner treatment, the final step of the setup is often used to make the retainer. The model of the final position is exported, prepared for printing in the same way, and the retainer is formed on it. When we design the aligner setup, we can deliver the final-stage model ready for printing.
What to send
- Intraoral scan of the arch, or arches, that need a retainer
- Whether you want undercuts blocked out
- Your printer, if you want the model hollowed or solid for it
- Any label you want on the base
Outsourcing model preparation
Our Model Creator service turns scans into print-ready models for thermoforming, from $5 per unit, delivered in 24 hours. You print the model and form the Essix retainer in your lab as usual.
Frequently asked questions
- What is an Essix retainer?
- A clear removable retainer made by thermoforming a plastic sheet over a model of the patient's teeth, used to hold the teeth in place after orthodontic or aligner treatment.
- Can an Essix retainer be made from an intraoral scan?
- Yes. The scan is turned into a printable model, the model is 3D printed, and the retainer is thermoformed on it in the usual way.
- Should the printed model be hollow or solid?
- For thermoforming, models are usually printed solid or with thick walls, so they do not deform under heat and pressure.
- How much does a printable model cost?
- Our Model Creator service starts at $5 per unit, delivered in 24 hours.
DM Dental Design offers dental CAD design services for labs and clinics: send your scans and get production-ready files back, with revisions included.