What a flipper tooth is
A flipper tooth is a small removable partial denture that replaces one or a few missing teeth, most often in the front of the mouth. It has a pink acrylic base that rests on the palate or the gum and one or more replacement teeth attached to it. The patient can take it out to clean it.
Flippers are usually a temporary solution: they fill the gap while an extraction site heals, while an implant integrates, or while the patient waits for a bridge or a definitive partial denture. They are light, quick to make and inexpensive compared with a cast metal framework.
Why labs now print flippers
Traditionally a flipper was made by hand: a stone model, a stock tooth, wax and heat-cured or self-cured acrylic. With an intraoral scan or a scanned model, the whole flipper can be designed in CAD and 3D printed in denture base and tooth resins.
A digital flipper has two practical advantages. The fit is repeatable, because the base follows the scan rather than a hand-adapted wax-up. And the file stays on record: if the patient loses or breaks the flipper, the lab can print a new one without a new impression.
How a flipper is designed in CAD
The design follows the same logic as any partial denture, simplified for a small case:
- The scan is checked and the path of insertion is chosen, so the flipper goes in and out without catching on undercuts
- The missing tooth is set up from a tooth library and matched in size and shape to the tooth on the other side
- The base outline is drawn: on the upper arch it usually covers part of the palate for support, on the lower arch it stays as small as stability allows
- Retention is added where the case needs it, with clasps or with the base engaging small undercuts on the neighbouring teeth
- The bite is checked so the replacement tooth does not take heavy contact when the patient closes or bites forward
- Teeth and base are exported as separate or combined STL files, depending on how the lab prints
Clasps or no clasps?
Many flippers stay in place without clasps, held by the fit of the base against the teeth and palate. When the case needs more retention, clasps are added on the neighbouring teeth: wire clasps added after printing, or clasps designed into the printed base.
The clinician decides how much retention the patient needs. Tell us in the prescription whether you want clasps and on which teeth.
What to send for a flipper case
- Scan of the arch with the gap, with the neighbouring teeth and the palate or gum fully captured
- Scan of the opposing arch and the bite registration
- Tooth number, shade and any shape preference
- Clasps: yes or no, and on which teeth
- Your printer and resins, if the teeth and base are printed separately
Outsourcing flipper design
We design flippers as partial dentures: tooth setup and base, with clasps where needed, delivered as print-ready STL files. The price is $50 per arch plus $10 per clasp, ready in 24 hours, and revisions are included until you approve the design.
Frequently asked questions
- What is a flipper tooth?
- A small removable partial denture with an acrylic base and one or more replacement teeth, usually worn as a temporary solution while the patient waits for an implant, a bridge or a definitive partial.
- Can a flipper be 3D printed?
- Yes. The flipper is designed in CAD from a scan and printed in denture base and tooth resins. The file can be printed again if the flipper is lost or broken.
- How much does flipper design cost?
- We design flippers as partial dentures: $50 per arch plus $10 per clasp, delivered in 24 hours with revisions included.
- What is the difference between a flipper and an RPD?
- A flipper is an all-acrylic, usually temporary partial. An RPD has a cast or printed metal framework with rests and clasps and is designed to last for years.
DM Dental Design offers dental CAD design services for labs and clinics: send your scans and get production-ready files back, with revisions included.